You Are Here : Home >> Products >> Spectrophotometer >> 3nh YD5050 45/0 Grating Spectrophotometer Densitometer

3nh YD5050 45/0 Grating Spectrophotometer Densitometer

3nh launched new model YD5050 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard ISO 5-4,CIE No.15, and it is good to use in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control.
More Photos:
Date:2020-05-29  Browse:
  • Introduction
  • Product Software

3nh YD5050 45/0 Grating Spectrophotometer Densitometer

3nh launched new model YD5010 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard  ISO 5-4,CIE No.15. It is suitable for using in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing; and it is able to customize single aperture Φ2mm,Φ4mm,Φ8mm.


Product Features

1. 45/0 geometrical optics structure, comply with CIE, the testing conditions of M O, M 1,M 2 , M 3 stipulated by ISO 13655 standard, it can accurately measure various printing density , overprint rate and other printing parameters.

2. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;

3. High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.;

4. Perfect combination of the beautiful appearance and the ergonomic structure design;

5. Switchable apertures: Φ2/4/8/20mm, adapt to more samples;

6. Large-capacity storage space, over 20,000 test data

7. Combined LED light sources with long life and low power consumption, including UV light;

8.  USB/Blue2.1 dual communication mode is widely useful;

9. Especially suitable for process control and quality control of printing plants;

10. PC software has powerful function expansion.

3nh YD5050 45/0 Grating Spectrophotometer Densitometer

YD5050 spectrodensitometer

YD5050 spectrodensitometer

YD5050 spectrodensitometer

 

Grating Spectrodensitometer

Model

YD5050 spectrodensitometer

Measurement Geometry

45/0(45 ring-shaped illumination, 0 degree viewing angle);ISO 5-4,CIE No.15

Features

high accuracy spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm,Φ4mm,Φ8mm.

Light Source

Combined LED Light, UV Light

Spectral separation device

Concave Grating

Detector

256 Image Element Double Array CMOS Image Sensor

Wavelength Range

400~700nm

Wavelength Pitch

10nm

Half Bandwidth

10nm

Measurement Conditions

Compliance with ISO 13655 measurement conditions;
M0 (CIE Light Soure A)
M1 (CIE Light Soure D50)
M2 (Excluding UV light source)
M3 (M2+Polarized light filter)

Density Standards

ISO Status A, E, I, T

Density index

Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray scale, density scanning

Measurement aperture

Customized one aperture:Φ2mm,Φ4mm,Φ8mm optional

Color Spaces

CIE LAB,XYZ,Yxy,LCh,CIE LUV,HunterLAB

Color Difference Formula

ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00,ΔE(Hunter)

Other Colorimetric Index

WI(ASTM E313,CIE/ISO,AATCC,Hunter),
YI(ASTM D1925,ASTM 313),
MI (Metamerism Index),Opacity,

Observer Angle

2°/10°

Illuminants

D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30)

Measurement Time

About 1.5s

Repeatability

Density: Within 0.01 D

Chromaticity value:within ΔE*ab 0.03 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration)

Inter-instrument Error

Within ΔE*ab 0.18 (Average for 12 BCRA Series II color tiles)

Measurement mode

Single Measurement, Average Measurement(2-99)

Size(L*W*H)

184*77*105mm

Weight

About 600g

Power source

Li-ion battery. 5000 measurements within 8 hours

Illuminant Life Span

5 years, more than 3 million times measurements

Display

3.5-inch TFT color LCD, Capacitive Touch Screen

Interface

USB, Bluetooth 4.0

Data memory

20000 pcs

Language


Simplified Chinese, English, Traditional Chinese

Working Environment

Temperature:0~40℃;Humidity:0~85% (No Condensation);altitude: less than 2000 m

Storage Environment

Temperature:-20~50℃;Humidity:0~85% (No Condensation)

Standard Accessory

Power Adapter, USB Cable, Built-in li-ion battery, User Manual, software(download from the website),White and Black Calibration Board, Protective Cover.Polarization filter box

Optional Accessory

Micro Printer,Locating Plate

Notes: The specifications are subject to change without notice.

 

YD5050 spectrodensitometer pdf download:

 

YD5050 spectrodensitometer operation video  https://youtu.be/7qsWH3vQIGs 

YD50 series spectrodensitometer user manual

YD5050 spectrodensitometer brochure

4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan District,
Copyright © 2011-2018 Shenzhen 3nh Technology Co., Ltd.. All Rights Reserved.