You Are Here : Home >> Products >> Spectrophotometer/Colorimeter >> 3nh YD5010 45/0 Grating Spectrophotometer Densitometer

3nh YD5010 45/0 Grating Spectrophotometer Densitometer

3nh launched new model YD5010 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard ISO 5-4,CIE No.15, and it is good to use in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control
More Photos:
Date:2020-02-27  Browse:
  • Introduction
  • Product Software

3nh YD5010 45/0 Grating Spectrophotometer Densitometer

3nh launched new model YD5010 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard  ISO 5-4,CIE No.15. It is suitable for using in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing; and it is able to customize single aperture Φ2mm,Φ4mm,Φ8mm.


Product Features

1.Perfect combination of the beautiful appearance and the ergonomic structure design;

2.Combined LED light sources with long life and low power consumption, including UV light;

3.Switchable apertures: Φ2/4/8/20mm, adapt to more samples;

4. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;

5.High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.;

6.Two standard observer angles: 2/10, multiple light source modes and color systems;

7.USB mode is widely useful;

8.Large-capacity storage space, over 10,000 test data;

9.Especially suitable for process control and quality control of printing plants;

10. PC software has powerful function expansion.

3nh YD5010 45/0 Grating Spectrophotometer Densitometer



Grating Spectrodensitometer

Model

YD5010 45/0 Spectrodensitometer

Measurement Geometry

45/0(45 ring-shaped illumination, 0 degree viewing angle);, ISO 5-4,CIE No.15

Features

Common spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm、Φ4mm、Φ8mm.

Light Source

Combined LED Light, UV Light

Spectral separation device

Concave Grating

Detector

256 Image Element Double Array CMOS Image Sensor

Wavelength Range

400~700nm

Wavelength Pitch

10nm

Half Bandwidth

10nm

Measurement Conditions

Compliance with ISO 13655 measurement conditions;
M0 (CIE Light Soure A)
M1 (CIE Light Soure D50)
M2 (Excluding UV light source)
M3 (M2+Polarized light filter)

Density Standards

ISO Status A, E, I, T

Density index

Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray level

Measurement aperture

Customized one aperture:Φ2mm,Φ4mm,Φ8mm optional

Color Spaces

CIE LAB,XYZ,Yxy,LCh

Color Difference Formula

ΔE*ab,ΔE*94,ΔE*00

Other Colorimetric Index

/

Observer Angle

2°/10°

Illuminants

A,C,D50,D55,D65,D75,F2,F7,F11,F12

Measurement Time

About 1.5s

Repeatability

Density: Within 0.01 D

Chromaticity value:within ΔE*ab 0.04 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Except M3

Inter-instrument Error

Within ΔE*ab 0.2 (Average for 12 BCRA Series II color tiles) Except M3

Measurement mode

Single Measurement, Average Measurement(2-99)

Size(L*W*H)

184*77*105mm

Weight

About 600g

Power source

Li-ion battery. 5000 measurements within 8 hours

Illuminant Life Span

5 years, more than 3 million times measurements

Display

3.5-inch TFT color LCD, Capacitive Touch Screen

Interface

USB,

Data memory

10000 pcs

Language


Simplified Chinese, English, Traditional Chinese

Working Environment

Temperature: 0~40℃; Humidity: 0~85% (No Condensation);altitude: less than 2000 m

Storage Environment

Temperature: -20~50℃; Humidity: 0~85% (No Condensation)

Standard Accessory

Power Adapter, USB Cable, Built-in li-ion battery, User Manual, software(download from the website),White and Black Calibration Board, Protective Cover,Polarization filter box,Locating Plate

Optional Accessory

Micro Printer

Notes: The specifications are subject to change without notice.

4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan District,
Copyright © 2011-2018 Shenzhen 3nh Technology Co., Ltd.. All Rights Reserved.