You Are Here : Home >> Products >> Density Meter >> 3nh YD5010 Plus 45/0 Standard Grating SpectroDensitometer

3nh YD5010 Plus 45/0 Standard Grating SpectroDensitometer

3nh YD5010 plus 45/0 Grating Spectrophotometer Densitometer3nh launched new model YD5010 plus Grating Spectrophotometer Densitometer with45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standardISO 5-4,CIE No.15. It is suitable fo
More Photos:
Date:2021-03-04  Browse:
  • Introduction
  • Product Software

3nh YD5010 plus 45/0 Grating Spectrophotometer Densitometer

3nh launched new model YD5010 plus Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard  ISO 5-4,CIE No.15. It is suitable for using in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing; and it is able to customize single aperture Φ2mm,Φ4mm,Φ8mm.


Product Features

1.Perfect combination of the beautiful appearance and the ergonomic structure design;

2.Combined LED light sources with long life and low power consumption, including UV light;

3.Switchable apertures: Φ2/4/8/20mm, adapt to more samples;

4. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;

5.High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.;

6.Two standard observer angles: 2/10, multiple light source modes and color systems;

7.USB mode is widely useful;

8.Large-capacity storage space, over 10,000 test data;

9.Especially suitable for process control and quality control of printing plants;

10. PC software has powerful function expansion.

3nh YD5010 plus 45/0 Grating Spectrophotometer Densitometer

3nh YD5010 plus 45/0 Grating Spectrophotometer Densitometer

3nh YD5010 plus 45/0 Grating Spectrophotometer Densitometer

Grating Spectrodensitometer

Model

YD5010 plus 45/0 Spectrodensitometer

Measurement Geometry

45/0(45 ring-shaped illumination, 0 degree viewing angle);, ISO 5-4,CIE No.15

Features

Common spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm、Φ4mm、Φ8mm.

Light Source

Combined LED Light, UV Light

Spectral separation device

Concave Grating

Detector

256 Image Element Double Array CMOS Image Sensor

Wavelength Range

400~700nm

Wavelength Pitch

10nm

Half Bandwidth

10nm

Measurement Conditions

Compliance with ISO 13655 measurement conditions;
M0 (CIE Light Soure A)
M1 (CIE Light Soure D50)
M2 (Excluding UV light source)
M3 (M2+Polarized light filter)

Density Standards

ISO Status A, E, I, T

Density index

Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray level

Measurement aperture

Customized one aperture:Φ2mm,Φ4mm,Φ8mm optional

Color Spaces

CIE LAB,XYZ,Yxy,LCh

Color Difference Formula

ΔE*ab,ΔE*94,ΔE*00

Other Colorimetric Index

/

Observer Angle

2°/10°

Illuminants

A,C,D50,D55,D65,D75,F2,F7,F11,F12

Measurement Time

About 1.5s

Repeatability

Density: Within 0.01 D

Chromaticity value:within ΔE*ab 0.04 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Except M3

Inter-instrument Error

Within ΔE*ab 0.2 (Average for 12 BCRA Series II color tiles) Except M3

Measurement mode

Single Measurement, Average Measurement(2-99)

Size(L*W*H)

184*77*105mm

Weight

About 600g

Power source

Li-ion battery. 5000 measurements within 8 hours

Illuminant Life Span

5 years, more than 3 million times measurements

Display

3.5-inch TFT color LCD, Capacitive Touch Screen

Interface

USB,

Data memory

10000 pcs

Language


Simplified Chinese, English, Traditional Chinese

Working Environment

Temperature: 0~40℃; Humidity: 0~85% (No Condensation);altitude: less than 2000 m

Storage Environment

Temperature: -20~50℃; Humidity: 0~85% (No Condensation)

Standard Accessory

Power Adapter, USB Cable, Built-in li-ion battery, User Manual, software(download from the website),White and Black Calibration Board, Protective Cover,Polarization filter box,Locating Plate

Optional Accessory

Micro Printer

Notes: The specifications are subject to change without notice.

 

YD5010 spectrodensitometer pdf download:

 

YD5050 spectrodensitometer operation video  https://youtu.be/7qsWH3vQIGs 

YD50 series spectrodensitometer user manual

YD5010 spectrodensitometer brochure

YD5010 PLUS spectrodensitometer brochure

4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan District,
Copyright © 2011-2018 Shenzhen 3nh Technology Co., Ltd.. All Rights Reserved.